Canford Dante to analogue converter 2 channel

From: £8.40 (£7.00 ex VAT)



These Canford Dante adapters provide an alternative to the existing Audinate and Amphenol in-line adapters and avoiding captive cables. They are simple stereo audio adapters to convert between either analogue or digital, to or from Dante.

Each unit is powered by PoE (Power over Ethernet), no external power is required.

Housed in a robust Canford extruded box, the adapters offer superior performance in analogue audio conversion and rugged connectivity through Neutrik Ethercon and XLR connectors. Above the Ethercon connector are two LED’s. Link status is indicated by the left LED, once power has been supplied to the unit the link status LED turns Red. The link status LED turns amber when a link is established with a link speed of 100 Mbps. Network activity is shown by the right Green LED, solid colour when connected, blinking when there is network activity.

General: 24-bit@44.1, 48 and 96KHz. Asynchronous sample rate conversion. Sample rate converter bypass via internal jumper.
Analogue Audio Output Performance
Output Impedance: <50 ohm balanced
0dBFS line-up: +18dBU
Frequency Response: 20Hz to 20KHz, +0/-0.5dB
THD + N: <-82dBu, -30dBFS, 20Hz to 20KHz, 20KHz BW
Noise: <-82dBu, 20KHz BW.
Crosstalk: <-90dB
Digital Audio Performance
Output Impedance: 110 ohms
Output Sample Rates: 32KHz – 96KHz. (Set in device config menu in Dante controller.)

We include PoE injector all in a Peli case.

Additional information





You may also like…